-17%

Revel Performa3 Series B112 1000 watt Powered Subwoofer – Each

$2,500.00

The extremely long (50mm) two-layer copper voice coil gives this transducer a very high Xmax, dramatically increasing output. A fiberglass voice coil former helps the voice coil withstand high temperatures, reducing power compression and helping increase output. A cardboard spacer added at the top of the voice coil former maintains motor geometry, creates a solid attachment joint and prevents deformation of the voice coil at high outputs. The spacer also eliminates the typical single fulcrum point between the spider and cone on the voice coil former, minimizing voice coil rocking modes during hi-power operation.

A high-temperature nomex spider features a progressive roll design that evenly distributes mechanical stress, helping keep the cone’s motion linear during high excursion operation.

A nitril/butylene rubber surround uses patented Plus One® technology that increases the transducer’s radiating area (Sd), increasing volume displacement and output.

SKU: B112 Categories: , Brand:

Description

  • built-in 1,000-watt RMS Class D amplifier (2,000 watts peak)
  • front-firing 12″ woofer with coated paper/pulp cone and vented die-cast aluminum frame
  • massive 30.6 lb. magnet assembly
  • sealed (acoustic suspension) enclosure
  • high-temperature Nomex® spider features a progressive roll design that evenly distributes mechanical stress
  • a nitri/butylene rubber surround uses patented Plus One® technology to increase displacement and output
  • cast aluminum frame is fully vented to minimize acoustic losses caused by excessive back pressure
  • 12-volt trigger inputs and outputs for sending a power-on signal to multiple subwoofers
  • compatible with Revel’s free LFO (Low-Frequency Optimization) software for extensive programming and room equalization
    • provides up to 10 independent equalization points, each with user-determined frequency, amount of gain/cut, and filter Q (bandwidth)
    • Windows® and Mac® compatible
  • connects to computer via USB cable
  • balanced (XLR) and unbalanced (RCA line-level) inputs and outputs
  • XLR and RCA high-pass outputs
  • power switch and auto power-on/standby/trigger modes
  • crossover frequency: 50-200 Hz
  • 15-3/4″W x 17-13/16″H x 16-1/2″D
  • weight: 70 lbs.

You may also like…