Enjoy versatile placement options with the right-oriented Klipsch THX-6000-LCR-R 2-Way LCR Speaker. It features 1/4″-20 bolt holes on the back for wall or ceiling mounting with a compatible mount and can be used at any position in a home theater system – in the front at the left, center, or right position, or as a surround channel.
Enjoy versatile placement options with the right-oriented Klipsch THX-6000-LCR-R 2-Way LCR Speaker. It features 1/4″-20 bolt holes on the back for wall or ceiling mounting with a compatible mount and can be used at any position in a home theater system – in the front at the left, center, or right position, or as a surround channel. When used as half of a stereo pair, the THX-6000-LCR-R should be installed as the right channel due to its tweeter placement.
The THX-6000-LCR-R uses a 1″ titanium dome tweeter mated to a 90 x 60° Tractrix horn for enhanced highs, and two 6.5″ Cerametallic anodized-aluminum cone woofers for mids and lows down to 48 Hz. The THX-6000-LCR-R accepts up to 150W of RMS power from your amplifier.
THX Ultra2-Certified
Designed primarily for front left, center, or right reproduction in high-performance home theaters, the THX-6000-LCR-R can also be used as a surround channel or in a combination home theater/music system. It’s rear-panel 1/4″-20 threads make it compatible with wall or ceiling speaker mounts rated for 40 lb or higher.
Right-Oriented LCR Design
While the THX-6000-LCR-R can be used as either a left, center, or right speaker, when used as half of a stereo pair, it should be installed as the right channel due to the positioning of the tweeter and horn.
10 x 6″, 90 x 60° Tractrix Horn
The 10 x 6″, 90 x 60° Tractrix horn helps raise the efficiency of the 1″ titanium-dome compression tweeter, optimizing its radiation pattern. The horn is designed to enable the speaker to meet THX Ultra2 directivity specifications without the lobing and comb filtering effects of multi-tweeter options. Its dual 6.5″ woofers are designed with large, magnetically shielded motor structures that drive rigid, low-mass Cerametallic anodized-aluminum cones for high output with low distortion.
Speaker Configuration
2-Way
Power Handling
150 W RMS
600 W Peak
Bi-Amp Capability
Yes
Drivers
2 x 6.5″ / 165.1 mm Cerametallic Cone Woofer
1″ / 25.4 mm Titanium Dome Tweeter
